这是一个创建于 2894 天前的主题，其中的信息可能已经有所发展或是发生改变。
在本版推荐买了 EdgeMax 路由一个比较满意。
最近折腾 L2TP 出现了一点问题求指教。
现在是接口的信息
下面是 l2tp 的相关操作
ubnt@ubnt:~$ configure
set vpn ipsec ipsec-interfaces interface eth0
set vpn ipsec nat-networks allowed-network 0.0.0.0/0
set vpn ipsec nat-traversal enable
set vpn l2tp remote-access authentication local-users username ubnt password letmein
set vpn l2tp remote-access authentication mode local
set vpn l2tp remote-access client-ip-pool start 10.0.1.241
set vpn l2tp remote-access client-ip-pool stop 10.0.1.245
set vpn l2tp remote-access dns-servers server-1 10.0.1.1
set vpn l2tp remote-access ipsec-settings authentication mode pre-shared-secret
set vpn l2tp remote-access ipsec-settings authentication pre-shared-secret sharedpass
set vpn l2tp remote-access ipsec-settings ike-lifetime 3600
set vpn l2tp remote-access outside-address 0.0.0.0
防火墙操作如下
最后连接 L2TP 时，错误提示为
Dec 22 11:04:38 ubnt pluto[3091]: packet from {client ip}:1011: received Vendor ID payload [RFC 3947]
Dec 22 11:04:38 ubnt pluto[3091]: packet from {client ip}:1011: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02]
Dec 22 11:04:38 ubnt pluto[3091]: packet from {client ip}:1011: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
Dec 22 11:04:38 ubnt pluto[3091]: packet from {client ip}:1011: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Dec 22 11:04:38 ubnt pluto[3091]: packet from {client ip}:1011: ignoring Vendor ID payload [FRAGMENTATION 80000000]
Dec 22 11:04:38 ubnt pluto[3091]: packet from {client ip}:1011: received Vendor ID payload [Dead Peer Detection]
Dec 22 11:04:38 ubnt pluto[3091]: packet from {client ip}:1011: initial Main Mode message received on {router ip}:500 but no connection has been authorized with policy=PSK
求明白人，解答一下，是什么情况- -
第 1 条附言 · 2016-12-31 20:05:43 +08:00
问题解决了。是固件的问题，路由固件升级到最新就解决问题了。
 |
1
julyclyde 2016-12-22 15:45:11 +08:00
你这个不是 L2TP 啊，是 L2TP/IPsec
|
 |
4
ericFork 2016-12-24 01:23:51 +08:00
server 端的日志呢？
|
Select Language